2 using your antenna or cable for tv, 3 using the antenna or cable through your vcr – Vizio VM60P User Manual
Page 21
VIZIO VM60P HDTV User Manual
Version 3/26/2007
21
www.VIZIO.com
2.3.2
Using Your Antenna or Cable for TV
1.
Turn off the power to the Plasma HDTV.
2.
Connect the coaxial (RF) connector from your antenna or cable to
the DTV/TV CABLE/ANTENNA connector at the rear of the
Plasma HDTV
3.
Turn on the power to the Plasma HDTV.
4.
Select TV using the INPUT button on the remote or
side of the Plasma HDTV, or directly by pressing the
TV button on the Remote Control.
2.3.3
Using the Antenna or Cable through your VCR
1.
Turn off the power to the Plasma HDTV and VCR.
2.
Connect the “Output to TV”, “RF Out” or “Antenna Out” connector
on the rear of your VCR to the DTV/TV CABLE/ANTENNA
connector at the rear of the Plasma HDTV.
3.
Turn on the power to the Plasma HDTV and VCR.
4.
Select TV using the INPUT button on the remote or
side of the Plasma HDTV, or directly by pressing the
TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear
of your VCR.