Vista 20SE User Manual
Page 3
– 3 –
*
36
ENTRY DELAY 2 (zone type 02)
| | [60] [60]
Part. 1 † Part. 2 †
00-99 = entry delay 2 time for each
partition; 50 seconds max. for UL installations
*
37
AUDIBLE EXIT WARNING
[1] [1]
Part. 1 † Part. 2 † 0 = no; 1 = yes
*
38
CONFIRMATION OF ARMING DING
[0] [0]
Part. 1 † Part. 2 †
0 = no; 1 = yes (wired keypads and RF); 2 = yes, RF only
*
39
POWER UP IN PREVIOUS STATE
† [1]
0 = no; 1 = yes; “1” for UL installations
DIALER PROGRAMMING (*40–*53)
In fields *40, *41, *42, enter up to the number of digits shown. Do not fill unused spaces. Enter 0–9; #+11 for '*';
#+12 for '#'; #+13 for a pause.
*
40
PABX ACCESS CODE
| | | | |
Enter 6 digits. If fewer than 6 digits are entered, exit by
pressing * (and press 41, if entering next field). To clear entries
from field, press *40* .
*
41
PRIMARY PHONE No.
| | | | | | | | | | | | | | |
Enter up to 16 digits; Do not fill unused spaces. If fewer than 16
digits entered, exit by pressing * (and press 42, if entering next
field). To clear entries from field, press * 41* .
*
42
SECONDARY PHONE No.
| | | | | | | | | | | | | | |
Enter up to 16 digits; Do not fill unused spaces. If fewer than 16
digits entered, exit by pressing * (and press 43, if entering next
field). To clear entries from field, press *42* .
*
43
PRIMARY SUBS ACCT # (Part. 1)
| | |
*
44
SECONDARY SUBS ACCT # (Part. 1)
| | |
*
45
PRIMARY SUBS ACCT # (Part. 2)
| | |
*
46
SECONDARY SUBS ACCT # (Part. 2)
| | |
NOTE:
If using the paging feature, do not enter a
leading 0 in the subscriber account number, and do
not use digits A-F anywhere in the number. Some
paging systems provide voice mail capability, which
is activated by a leading 0 in the message.
For fields *43 - *46:
Enter 0–9; #+11 for B; #+12 for C; #+13
for D; #+14 for E; [#+15 for F]. Enter * as
4th digit, if 3+1 dialer reporting is to be
used. If only 3 digits used, exit by pressing
* (and press next field).
To clear entries from field, press *43*
,*44*, *45*, or *46* .Examples:
For Acct.
1234
, enter:
1 | 2 | 3 | 4
For Acct.
B234
, enter:
#+11| 2 | 3 | 4
For Acct.
123
, enter:
1 | 2 | 3 | *
*
47
PHONE SYSTEM SELECT
† [1]
If Cent. Sta.
IS NOT on a WATS line: 0 = Pulse Dial; 1 = Tone
Dial; if Cent. Sta.
IS on a WATS line: 2 = Pulse Dial ; 3 = Tone
Dial.
*
48
REPORT FORMAT
[7] [0]
Primary
Secondary
0
= 3+1, 4+1 ADEMCO L/S STANDARD
1
= 3+1, 4+1 RADIONICS STANDARD
2
= 4+2 ADEMCO L/S STANDARD
3
= 4+2 RADIONICS STANDARD
6
or undefined
= 4+2 ADEMCO EXPRESS
7
= ADEMCO CONTACT ID REPORTING
8
= 3+1, 4+1 ADEMCO L/S EXPANDED
9
= 3+1, 4+1 RADIONICS EXPANDED
† Entry of a number other than one specified will give unpredictable results.