Volvo S40 - Manual (Page 43)

2003 Volvo S40 & V40
Trip Computer Selector Knob
Function selection knob A
Use this to select one of the six functions.
Reset button B
Resets:
- Average speed
- Average fuel consumption
- Tripmeter
Turn the knob to the desired function, then press reset button B for 1.5 seconds.
Pressing reset button B for more then 4 seconds, will reset all functions.
pg. 29 Trip Computer (option)
Trip Computer functions in detail
1 Ambient temperature
Indicates the temperature of the outside air (only accurate while driving) approx. 16 inches (40 cm)
above road surface.
The warning function comes on if the ambient temperature is between 23°F to 36°F (-5°C and +2°C) to
warn you that there might be ice on the road.
The temperature and the snowflake symbol will be shown in the display.
If another function is selected the frost symbol will still be shown in the display.
2 Average speed
Average speed based on distance travelled since the memory was last reset using reset button.
3 Average fuel consumption
Average fuel consumption from when the Trip Computer memory was last reset using reset button.
4 Current fuel consumption
Gives information about current fuel consumption, updated every second. It is calculated from the
amount of fuel injected and the distance traveled.
If the vehicle is standing still (as at a stop sign or traffic signal), the display will show "---".
5 Tripmeter
Shows, in 0.1 mile (0.1 km) increments, distance traveled since last reset. After 999 miles, the display
file:///K|/ownersdocs/2003/2003_SV40/03sv40_02b.htm (4 of 10)12/30/2006 4:16:05 PM