Volvo S40 - Manual (Page 158)

2003 Volvo S40 & V40
Bore 3.27" (83 mm)
Stroke 3.54" (90 mm)
Displacement 1.95 liters (118.9 cu. in.)
Compression ratio 9.0:1
Number of valves 16
Valve clearance mechanical
All specifications are subject to change without notice.
pg. 124 Specifications
Cooling system
Type: Positive pressure, closed system
Thermostat begins to open at 186° F (90° C)
Coolant: Volvo original coolant/antifreeze (50/50 water-antifreeze mix).
Capacity: 6 US qts. (5.7 liters)
Fuel system
The engine is equipped with a multipoint fuel injection system.
Distributor ignition system
Firing order: 1-3-4-2
Distributor ignition setting: Not adjustable
Spark plugs: Champion RC8PYP or equivalent
Spark plug gap: 0.0315" (0.80 mm)
Tightening torque: 18.4 ft. lbs. (25 Nm)
WARNING!
The distributor ignition system operates at very high voltages. Special safety precautions must be
followed to prevent injury. Always turn the ignition off when:
●
Replacing distributor ignition components e.g. plugs, coil, etc.
●
Do not touch any part of the distributor ignition system while the engine is running. This may
result in unintended movements and body injury.
All specifications are subject to change without notice.
Front suspension
file:///K|/ownersdocs/2003/2003_SV40/03sv40_09.htm (3 of 8)12/30/2006 4:16:14 PM