Volvo S40 - Manual (Page 165)

2003 Volvo S40 & V40
A red LED will flash when the key had been removed from the ignition to confirm that the anti-theft
circuitry has been activated.
To enter the code
After installation or when the set has been disconnected from power, the set displays "input CODE
****" when it is switched on.
Enter the 4-digit code using the 1-20/DISC knob. Select a number for a digit by rotating the 1-20/DISC
knob. And then push the knob to enter the number. Repeat the procedure for all 4 digits.
If the correct code is entered the set is ready to use.
If you enter an incorrect code you must enter the correct code again from the beginning.
Incorrect code
If an incorrect code has been entered "Error" is displayed. Enter the correct code. After three
unsuccessful coding attempts the set will lock and remain locked for two hours.
"OFF" is displayed.
During this waiting period:
●
the battery must be connected
●
the ignition key must be turned to position I
●
the unit must be turned on
Make sure the headlights are turned off to help prevent battery drain.
Enter the code again once 2 hours have elapsed.
pg. 131 Audio system HU-415
1. Switch On/off (push)
Volume (turn)
2. Selector knob:
Select the channel (turn)
file:///K|/ownersdocs/2003/2003_SV40/03sv40_10.htm (2 of 13)12/30/2006 4:16:15 PM