VIEWSONIC Optiquest V75 - Manual (Page 9)

8 Operation Optiquest V75
E
N
G
L
I
S
H
VESA 1024 x 768 75
Contrast 90
EXIT
OnView Main Menu
Contrast adjusts balance between background (black level) and
foreground (white level) of screen image.
CW to increase, C-CW to decrease.
Shortcut: Without pressing OSD button, turn Control Wheel.
Brightness adjusts background (black level) of screen image.
CW to increase, C-CW to decrease.
Horizontal Size adjusts width of screen image.
CW to increase, C-CW to decrease.
Horizontal Position moves screen image to right or left.
CW to move to right, C-CW to move to left.
Vertical Size adjusts height of screen image.
CW to increase, C-CW to decrease.
Vertical Position moves screen image up and down.
CW to move up, C-CW to move down.
Pincushion corrects for inward sagging or outward bowing
appearance of screen image's vertical sides.
CW to bend sides outward, C-CW to bend sides inward.
Pin-Balance curves screen's vertical edges to right or left.
CW to curve to right, C-CW to curve to left.
Trapezoid makes vertical edges of screen image parallel.
CW to make bottom of screen image more narrow, C-CW to make the
top of screen image more narrow.
Parallelogram slants vertical sides of screen image to right or left.
CW to slant sides to right, C-CW to slant sides to left.
NOTE For all controls:
"CW"= turn Control Wheel
clockwise
"C-CW" = turn Control Wheel
counter-clockwise
Color
Controls
Menu
ViewMeter
® Miscellaneous
Controls Menu Advanced
Controls
Menu
To exit an OnView ® menu or screen, and save changes, press and hold the OSD button.
Shortcut: When the control screen
of any of these controls is displayed,
press the RECALL button (see page
7) to toggle to the other control in
each pair (shown with dashed lines).