VIEWSONIC Optiquest V75 - Manual (Page 12)

11 Optiquest V75 Operation
E
N
G
L
I
S
H
To exit an OnView ® menu or screen, and save changes, press and hold the OSD button.
Degauss removes the build-up of magnetic fields that can cause
irregular colors to appear around the edges of screen images. (Also see
page 7.)
Important: Do not degauss repeatedly. Doing so can be harmful to
the monitor. Wait at least 20 minutes before using this control again.
Power Save To select and deselect the power saving option,
highlight "Power Save" and press OSD button to toggle ON/OFF.
Power Save has two states: Suspend and Off (see page 15).
Language to choose from among five languages for all OnView
menus and control screens, highlight "Language" and press the OSD
button to select either English, French, German, Italian, or Spanish.
Save User To save the current adjustments for all controls (size,
position, color, etc.) turn the Control Wheel to highlight an empty
position (number or letter that is not highlighted) and press the OSD
button. This saves all adjustments for the current timing mode
(resolution and frequencies sent from the graphics card in your
computer).
Delete User To delete a group of controls adjustments you saved
previously, turn the Control Wheel to highlight the appropriate number
or letter, and press the OSD button.
...continued
Degauss
Power save
VESA 1024 x 768 75
Miscellaneous
Language
Save User
Delete User
OSD HPos
OSD VPos
NOTE For all controls:
"CW"= turn Control Wheel
clockwise
"C-CW" = turn Control Wheel
counter-clockwise
Miscellaneous Controls Menu (on Main Menu)
Return to OnView
Main Menu
EMPTY
H: 60.00KHZ+
V: 75 HZ+
0 1 2 3 4 5 6 7
8 9 A B C D E
VESA 1024 x 768 75