Vizualogic A-1000 - Manual (Page 5)

16
5
Monit
or C
ont
rol But
tons
(c
ont
inued)
9 10 11
9.
EJ
EC
T –
Press this button to
eject the disc.
10.
Disc Slot 11
.
LCD P
anel
To
open/re
veal the DVD
loading
slot, P
RE
SS
on the top-center of
the monitor frame (indicated by the Vizualogic logo). NO
TE:
Do not put pressure directly on the screen. Latch the monitor in the fully closed position when DVD
loading slot
is not in use.
Car
e and Ma
int
enanc
e
Your Vizualogic S
ystem is a product of superior design and craftsmanship and
should be treated with care. The suggestions belo
w will help to fulfill any warran-
ty obligations and provide many years of enjoyment. • Cleaning the Monitor Screen and Housing: The components may be cleaned
by occasionally wiping with a soft, lint-free, cotton cloth that has been slightly dampened with water
.
C
AUTION: Do not use liquids, abr
asives, aerosol cleaners, or paper
cleaning products bec
ause they will result in permanent damage to the
finish of your components! The L
CD screen is made of a specially coated
glass and c
an be scr
atched or damaged by abr
asive or ammonia-based
windo
w cleaners.
• Use and Storage:
- These units contain precision electronics that must be protected from dust,
dir
t, and moisture.
- Ne
ver spill liquids on any of the components. Liquids, humidity, and
precipitation contain minerals that will corrode electronic circuits.
• T
ake care to avoid the follo
wing:
- Rough handling can break internal circuit boards. Do not drop, knock, or
shake the components.
- Do not attempt to paint or refinish the components. Paint can clog moving
par
ts and pre
vent proper operation.
- The components can be damaged by non-e
xper
t handling. Attempting to
open any of the components may void the limited warranty
.