Veo Pan and Tilt User Manual
Page 81

Network Camera User’s Guide
81/95
Network Camera.
2. Reconfigure the Network Camera.
Forgot the IP address of 
the Network Camera. 
Check IP address of Network Camera by using the IP Finder 
program. 
IP Finder program 
cannot find Network 
Camera. 
• Re power the Network Camera if cannot find the unit within 
1 minutes. 
• Do not connect Network Camera over a router. IP Finder 
program cannot detect Network Camera. 
• If IP address is not assigned to the PC which running IP 
Finder program, then IP Finder program cannot find Network 
Camera. Make sure that IP address is assigned to the PC 
properly. 
• Antivirus software on the PC might interfere with the setup 
program. Disable the firewall of the antivirus software during 
setting up Network Camera. 
Internet Explorer does 
not seem to work well 
with the Network 
Camera 
Make sure that your Internet Explorer is version 5.0 or later. If 
you are experiencing problems, try upgrading to the latest 
version of Microsoft’s Internet Explorer from the Microsoft 
webpage at: http://www.microsoft.com/windows/ie. 
IP Finder program fails 
to save the network 
parameters. 
• Don’t leave any space in the name field. Use underline, “_”, 
or dash, “-“ to replace the space, “ “. 
• Network may have trouble. Confirm the parameters and 
connections of the Network Camera. 
Access Network Camera
Cannot access the login 
page and other web 
pages of Network 
Camera from Internet 
Explorer 
 
 
• Maybe the IP Address of the Network Camera is already 
being used by another device or computer. To confirm this 
possible problem, disconnect the Network Camera from the 
network first, and then run the PING utility to check it out. 
• Maybe due to the network cable. Try correcting your 
network cable and configuration. Test the network interface 
by connecting a local computer to the Network Camera via a 
crossover cable. 
• Make sure the Internet connection and setting is ok. 
• Make sure enter the IP address of Internet Explorer is 
correct. If Network Camera has a dynamic address, it may 
have changed since you last checked it. 
• Network congestion may prevent the web page appearing 
quickly. Wait for a while. 
The IP address and Subnet Mask of the PC and Network 
Camera must be in the same class of the private IP address 
on the LAN. 
• Make sure the http port used by the Network Camera, 
default=80, is forward to the Network Camera’s private IP 
address. 
• The port number assigned in your Network Camera might 
not be available via Internet. Check your ISP for available 
port. 
• The proxy server may prevent you from connecting directly 
