Viper 671XV User Manual
Page 30
27
© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
➤
A
Accttiivvee aarrm
miin
ngg (only with the 2-way remote) or passive
arming (automatic arming 30-seconds after the last door has
been closed).
➤
Arming/disarming confirmation siren chirps oon
n or off.
➤
The ignition controlled door lock feature oon
n or off: With
this feature on, the doors will lock three seconds after the
ignition is turned on, and unlock when the ignition is
turned off. The system will not lock the doors when the igni-
tion is turned on with any door open. If your installer is
programming the security system with the Directed
Bitwriter, ignition lock and unlock are independent features
and can be programmed separately.
➤
Passive door locking (with passive arming) or aaccttiivvee d
doooorr
lloocckkiin
ngg (only when arming with the 2-way remote). Passive
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
➤
Panic mode een
naab
blleed
d/disabled with the ignition on: Some
states have laws against siren capability in a moving vehicle.
➤
Forced passive arming oon
n or off: If your system is
programmed for passive arming and the forced passive
arming feature has been programmed on, the system will
passively arm after one hour, even if a protected entry has
been left open. This feature is useful if a door has been left
note: When programmed for passive arming and active
lock, if the system is disarmed without a door being
opened, the system will relock the doors when it passive-
ly rearms.