Vivitar DVR 830XHD - Manual (Page 19)

18
Alternatively, press the Power button to turn your DVR camera off. The DVR
camera will switch off.
To save battery power, the LCD monitor automatically turns off 30 seconds after the last
control is accessed (factory-preset setting). Press any button other than the power
button to turn on the LCD monitor.
By default, if the DVR camera is not in use or in an operational mode for 60 seconds it
will switch off automatically
Press the Power button to power the camera back on.
You can change the power-off time by selecting the desired setting in the [Auto off]
function in the SETUP menu.
When there is insufficient battery power, a icon will appear on the LCD screen. The
camera will automatically power off a few moments later
.
MODE selection
The DVR camcorder has four record modes. To change to the different modes you
need to rotate the mode dial so that the relevant mode is in line with the red dot outside
the dial.