Visioneer PATRIOT 480 - Manual (Page 50)

C ONFIGURING THE O NE T OUCH B UTTONS
45
C
ONFIGURING THE
O
NE
T
OUCH
B
UTTONS
When you installed OneTouch, the software was configured with the
applications on your computer that you can scan to. Each OneTouch
button configuration consists of a Destination Application, a Scan
Configuration, and a File Format. The OneTouch Properties window is
where you select these three elements for a button.
To open the OneTouch Properties window:
There are two methods that you can use to open the OneTouch Properties.
■ Left-click on the OneTouch icon, in the Windows Notification Area,
then right-click on one of the destination icons.
The OneTouch Properties window opens to the button function that
you right-clicked on.
■ Press, hold down for at least 3 seconds, then release either the Simplex or
Duplex button.
The OneTouch Properties window opens to the function number that is
displayed on the scanner’s LED display.
Right-click on a button (for example, button 2)
and the Properties window opens for that button.