Visioneer PATRIOT 480 - Manual (Page 29)

24 V ISIONEER P ATRIOT 480 S CANNER U SER ’ S G UIDE
Scanning from
OneTouch
With powerful features such as scanning with VRS and to searchable PDF
at the touch of a button, OneTouch is the main interface for using the
scanner and accessing these features.
L
OAD AND
S
CAN
D
OCUMENTS FROM THE
I
NPUT
T
RAY
When you press either the Simplex or Duplex button, documents are
scanned using the scan settings indicated by the LED number. The scanned
images are then sent to a software application or location (known as the
Destination Application) on your computer.
1. Adjust the paper guide for the width of the paper, and make sure the
output tray is fully extended.
Note: Always remove any staples or paper clips from documents before
inserting them into the scanner’s Automatic Document Feeder. Staples
and paper clips can jam the feed mechanism and scratch the internal
components. Also remove any labels, stickers, or Post-It™ notes that
may come off during the scanning process and get stuck in the scanner.
Misuse as described here will void your scanner’s warranty.