Step 1: assemble the scanner, Ssemble, Canner – Visioneer PATRIOT 480 User Manual
Page 11
6
V
ISIONEER
P
ATRIOT
480 S
CANNER
U
SER
’
S
G
UIDE
S
TEP
1: A
SSEMBLE
THE
S
CANNER
1.
Remove all shipping tape from the top and bottom of the scanner.
2.
Carefully remove the protective foam from the ADF cover release, then
press the release and open the Automatic Document Feeder cover.
3.
Carefully remove any foam particles that may have gotten inside the
document feeder, and close the cover.
4.
Align the slots on the paper guide with the ridges on the scanner and
slide it down until it snaps into place.
5.
Select either the Front Feed with Output Tray or the standard Output
Tray.