VTech CS5113 - Manual (Page 9)

7
When there is a power failure, the time may need to be reset. •
Date and time
If you subscribe to caller ID service, the date and time is set automatically with
the next incoming call. If you do not have caller ID service, you can set the
date and time manually.
Press PROG when the handset is not in use.
Press or until DATE/TIME is displayed. Press SELECT .
When the month is flashing, press or until the screen displays the
correct month and then press SELECT.
When the date is flashing, press or until the screen displays the correct
date and then press SELECT .
When the hour is flashing, press or until the screen displays the correct
hour and then press SELECT .
When the minute is flashing, press or until the screen displays the
correct minute and then press SELECT .
When AM or PM is flashing, press or to choose between AM or PM
and then press SELECT . You will hear a confirmation tone.
1.
2.
3.
4.
5.
6.
7.
Ringer
You can select from different ringers.
Press PROG when the handset is not in use.
Press or until the screen displays RINGER: and the current setting.
Press SELECT. The current setting flashes, and you will hear a sample of the
ringer.
Press
or to select RINGER: 1, 2, 3, or 4. You will hear a sample of
each ring tone.
Press
SELECT to confirm your selection . You will hear a confirmation
tone.
Ringer volume
You can change the ringer volume to a comfortable level or turn the ringer off.
Press PROG when the handset is not in use. Press or until the
screen displays RINGER VOL: and the current setting.
Press SELECT . The current setting flashes, and you will hear a
sample of the ringer volume.
Press or
to select ringer volume from OFF , LOW or HI . You will
hear a sample of the selected volume level.
1.
2.
3.
4.
5.
1.
2.
3.
Telephone settings