VTech CS5113 - Manual (Page 19)

17
Telephone operation
Call log
If you subscribe to caller ID service, information about each caller will be
displayed after the first or second ring.
The call log can store up to 45 entries.
When the call log is full, the earliest entry will be deleted to make room for
new incoming call information.
CID EMPTY will be displayed if there is no record in the call log.
•
•
•
Date of call Time of call
Caller’s telephone
number
Caller’s name
New call log indicator
and location in the
call log
VTECH
800-595-9511
NEW 05
6:10 AM 08/17
If you answer a call before the information appears on the screen, it will not
be stored in the call log.
The time on the handset screen is automatically set and updated with
incoming caller ID information if you subscribe to this service.
Due to regional service differences, the caller ID information may not be
available for every incoming call. In addition, the callers may intentionally
block their names and/or telephone numbers.
•
•
•
Review the call log
Press /VOL-/CID to view the call log.
Press or to scroll through the entries.
There will be an error tone at the end of the call log list and the screen will
display END OF LIST.
1.
2.
If you have programmed a home area code (page 8), only the last seven
digits of the incoming phone numbers from that area code will be displayed
while reviewing the call log. Press # repeatedly to display all possible
dialing options.
•