VTech CS5113 - Manual (Page 16)

14
Telephone operation
Copy a directory entry into speed dial
Press /VOL+/ when the handset is not in use. The screen displays
DIRECTORY.
Press or to scroll through the entries stored in the directory
alphabetically.
-OR-
Press the dial pad key for the first letter of the entry to copy. If necessary,
scroll or to find the desired entry.
3. When the screen displays the desired entry, press
SELECT. Then press or until SPEED flashes.
4. Press SELECT. The screen displays ENTER 1-9.
5. Press a key ( 1-9) to copy this entry from the
directory to the speed dial memory and assign the
memory location. You will hear a confirmation beep. A memory location
number ( 01 through 09) will be displayed with this entry.
Dial a number from the directory
Press /VOL+/ when the handset is not in use. The screen displays
DIRECTORY.
Press or to scroll through the entries stored in the directory
alphabetically.
-OR-
Press the dial pad key for the first letter of the desired entry. If necessary,
scroll or to find the desired entry.
3. When the screen displays the desired entry, press .
1.
2.
1.
2.
SPEED EDIT DEL
8005959511
Speed dial
Your telephone can store up to nine telephone numbers with names (up to 14
characters and 24 digits in each location) in the speed dial memory locations
you assign in the handset.
Store a speed dial entry
Press PROG when the handset is not in use and then press or until the
screen displays SPEED DIAL .
Press SELECT. The screen displays ENTER 1-9.
Press a key ( 1 through 9) to assign the speed dial location to store this
number. The screen displays ENTER NAME.
Use the dial pad keys to enter the name (see the Character chart on page
12) and then press SELECT or PROG.
Press to move the cursor to the left or to the right.
Press CHAN/REMOVE to erase a character.
1.
2.
3.
4.
•
•