Vivitar DVR 1020HD - Manual (Page 44)

43
Reset All Settings (Factory Default Settings) Menu
Use this menu to reset your camera settings to the Factory Default Settings.
1) Press the MENU button to open the menus for the current mode.
2) Press the direction button LEFT or RIGHT to scroll and select the Reset All Settings menu.
3)
The “Default Setting” is selected.
4) Press the OK button to reset the camera to the factory default settings.
5) You will be asked to confirm the resetting to the factory default settings.
 Select “No” and press the OK button to exit the menu and return to the previous menu without
resetting to the default settings.
 Select “Yes” and press the OK button to proceed with the reset.
You will then automatically exit the menu and return to the previous mode with the digital
camera settings set to the Factory Default Settings.
Note: After RESETTING to the default settings, it is recommended to select your system
Language and Date/Time. If you do not, the next time your camera is powered on, you will be
prompted to define those settings.