VIEWSONIC VS12075 - Manual (Page 14)

Quick start guide
English
1
Play Audio
From the main screen, press the navigation keys to select AUDIO, then select
the audio source you want to play.
Audio pre-stored in the device will appear when no memory card or USB flash
disk is connected.
1. Insert your memory card containing audio into the corresponding slot,
or insert your USB flash disk into the USB port. Audio on your memory
card will appear after a few seconds. See page 9 for memory card and
USB port locations.
2. Press the navigation keys to select the desired audio, then press OK to
view.
3. The selected audio begins to play.
To exit the AUDIO functions, press Main Menu on the remote control.
Advanced audio functions
Press View on the remote control or hold the Right navigation key
for two seconds to enter the audio settings menu.
Repeat audio
1. Press the navigation keys to select one audio.
2. Press View on the remote control or hold the Right navigation key
for two seconds to enter the audio settings menu.
3. Select Music Repeat, then press OK.
4. Select All to repeat all audio, or One to repeat only the selected audio.
5. Press OK to play.
Copy audio from your audio source
1. Press the navigation keys to select one audio.
2. Press View on the remote control or hold the Right navigation key
for two seconds to enter the audio settings menu.
3. Select Copy to or Copy all to, then press OK.
4. Select the source where you want to store the selected audio.
5. Press OK to copy.