Vizio EXES-5000 CPU-55 - Manual (Page 4)

Summary of Dial Operations
Classification Function Dial operation Number
Press-to-talk
Continuous calling tone
Privacy
Secretary transfer
Single digit registration
Single digit dialing
Personal number registration
Personal number cancellation
Personal number call
Confernce
Conference clear
Mic o f f
Priority/priority response
Executive priority
Call transfer
Camp-on-busy
Camp-on-privacy
PTT
PTT
PRIVACY
PRIVACY
Privacy off ON
PRIVACY
ON
PRIVACY
Secretary transfer off ON
Registration dials (maximum 4 digits)
Confirmation tone
Confirmation tone
Calling Calling
Busy tone Station called
Busy tone
Call conversation
Transfer
Conversation with
original station
Not necessary to re-dial even if station call is busy.
1
station no., personal no.,
single digit number
station no., personal no.,
single digit number
station no., personal no.,
single digit number
Conversation is simplex when PTT bar is used.
Called party so programmed touches PTT bar,
then Hands-free conversation may begin.
When a party does not wish to accept incom-
ming calls, set the Privacy Switch in the ON
position.
This function allows for automatic transfer of
calls to a secretary when desired.
This function allows for single digit registration
of up to 4 digits among the numbers 0 through
9 and the
key.
Registered dial code may be automatically
dialed.
Personal members may be resistered at any
master station which the person to whom the
number is assigned expects to be.
When anyone having a personal number leaves
the office, he merely cancels the program-
ming of his personal number.
A conference call may be made with up to 4
persons. Participans must be called individually.
If a person called into a conference is absent,
the conference may be returned to the original
condition.
This function is used to temporarily hold a
conversation, causing a holding tone to sound
at both stations. The line is thus kept open
until the party who operates the mic off switch
re-dials and the call is continued.
When the called party is busy, this function
signals to request priority. The party requesting
can talk after the called party responds.
When the called party is busy, this function
allows interruption of the existing conversation
and immediate direct contact with the called
party.
The called party can transfer the call to a
selected other station (by station number,
personal number or single digit number).
When the party called is on the line or when his
station is in the privacy mode, the call is held
and is automatically put through as soon as the
line is open.
Call
Description
1000 ~ 1499