beautypg.com

All-call paging and individual zone paging – Vizio EXES-5000 CPU-55 User Manual

Page 20

background image

All-Call Paging and Individual Zone Paging

External PA paging to a specific zone is possible from any

master station by pressing

and the desired zone number ('0' = all-call). It is possible to
wait for a response in this mode, but anything said will be

broadcast over the entire zone. It is best to end the paging
call by pressing

and waiting for a response.

All-call paging of zones 1 through 7 can be done in both
the External PA paging mode, through An external ampli-
firs and speakers, and the station paging mode, through
the station speakers. All-call paging of zones 8 through 15
can be done only in the external paging mode.

Paging transfer

An external PA paging call can be made by a called party of
an existing call to a third party, the third party's response

accepted while the original call is on hold, and the original
call resumed when the response call has ended. Press

Table of stations used for individual zone paging. (Example)

Zone

numbers

1 0

1 1

1 2

1 3

1 4

1 5

First station number

2 0 1

2 0 5

2 1 0

Last station number

2 0 3

2 0 7

2 1 9

All-call paging

Zone paging

Response to All-call paging

Response to zone

paging

Conversation

On hold

External PA paging

Resuming

the original call

To respond to a paging call, go to the nearest master sta-
tion and press either

(Zone paging response) or

(All-call paging response).

and the desired zone number. This puts the original call on

hold and makes the External PA and or Station paging call.

Then, press

to restore the original call, and wait for the

response to the paging call. When the response is received,
press

and the original goes back on hold allowing the

second call to be taken. When the second call is completed,

press

and the original call can be resumed.

Note 1: When all-call paging is initiated during zone paging,

the Zone paging is interrupted and restored after
the all-call paging is finished.

Note 2: To respond to Zone paging by pressing

No.200 registration of the stations (consecutive

station numbers) within each zone must be made.
Such registration is required for both external and
station paging. For further details, please refer to

Installation Hand Book for EXES-5000 CPU-55.

— 1 9 —