Viper 5902 - Manual (Page 46)

Feature Details
43 © 2009 Directed Electronics. All rights reserved.
screen).
The vehicle lights flash 5 times to confirm MTS mode en-
4.
able and the remote start activates the ignition outputs. The
REMOTE START ACTIVATED
animation and beeps play to confirm.
Turn 5. Off and remove the key from the ignition switch, the engine
remains running.
Exit
6. the vehicle, close all the doors and arm the system.
The engine turns off and after a few seconds, the 7.
REMOTE START DEACTIVATED
message plays to confirm. If the door is
opened in Step 3 then the engine continues to run.
Turbo Timer Mode
The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
With the engine running, 1. set the parking brake.
Within 20 seconds, 2. press the optional dash mounted activation
button or send the Timer Mode command from the Advanced
Start menu screen.
The vehicle lights turn on and the remote start activates the igni-
3.
tion outputs. The
REMOTE START ACTIVATED
animation and beeps
play to confirm.
Turn
4. Off and remove the key from the ignition switch, the engine
remains running.
Exit
5. the vehicle, close all the doors and arm the system.
The engine runs for the Turbo Mode runtime. 6.
Note Turbo Timer must be turned on by an authorized Directed
dealer.