Viper 5902 - Manual (Page 35)

32 © 2009 Directed Electronics. All rights reserved.
To adjust and save a new meter setting follow the on-screen in- 3.
structions.
Menu wheel: s Press to highlight the digit to be adjusted.
Toggle to adjust the setting up/down.
s or : Press to highlight the digit to be adjusted.
AUX
s : Press to reset the meter.
s : Press to save new setting and go back to the Parking
Meter screen.
To Stop, Start and Clear the Parking Meter time (in the Info Center):
With the Status screen displayed, s press and hold the menu
wheel for 3 seconds, the colon in the timer meter stops
blinking and 2 beeps are emitted to confirm the meter has
stopped. The meter remains in the display.
Press
s and hold again for 3 seconds to restart the meter (the
timer meter colon begins blinking again).
Press
s and hold for 6 seconds any time, the timer will clear
from the display.
Countdown Timer
Options: Start Timer, Countdown Timer Set
Your Responder HD remote control has a feature for setting a count-
down timer designed to be used as a reminder only. At expiration the
COUNTDOWN TIMER EXPIRED
animation and 4 beeps play followed by
an alert output of 2 beeps every minute for 10 minutes.
Setting, Stopping, Starting and Clearing of the Countdown timer and
alert uses the same process as previously described for the
Parking
Meter .