Disarm, Remote start – Viper 5902 User Manual

Page 16

Commands

Disarm

Press and release

The alarm disarms, doors unlock (if connected), and the siren chirps
and lights ﬂash twice. The

DISARM

animation and beeps play to con-

ﬁrm. If Valet mode* is On the doors unlock and the

UNLOCK (IN VALET)

animation and tone play.

More than 2 siren chirps and remote beeps indicates a trigger has
occurred. The Disarm animation is then replaced by the Alarm Trigger
report.**

Remote Start

Press and release

Activates (or if On, deactivates) the remote starter. The engine and lights
turn On and the

REMOTE START ACTIVATED

animation and On tones play,

or the engine and lights turn Off and the

REMOTE START DEACTIVATED

animation and Off tones play to conﬁrm. The Remote Start status icons
in the Status screen are updated accordingly. If Remote Start fails to
activate, a fault screen and tone plays to identify the reason.***

See R

emote and System Operations

for details.

** See

Alarm Features

for details.

*** See

Remote Start Not Available (Remote Start Features)

For Manual transmission vehicles see the

Manual Transmission Start

sec-

tion under

Remote Start Features

for more details.