Velodyne Acoustics Digital Drive - Manual (Page 52)

Appendix B: Summary of Special Remote Codes
46
.
w w w . v e l o d y n e . c o m
Digital Drive User’s Manual
Following are special remote codes and their functions. Unless otherwise noted, the codes are
active only on the cover page.
Function Code Description
Self-EQ 3-2-1 Initiates Self-EQ feature.
Be sure to connect the
microphone before engaging.
Press RESET to cancel
prematurely. After 25 sweeps,
the unit saves and resets.
Restore defaults 8-9-0 Restores defaults and
resets the subwoofer.
Switch to DOWN ARROW The unit restarts in
PAL/SECAM 4 times followed PAL/SECAM video mode.
video by RESET TO restore NTSC mode,
restore defaults.
Display serial number UP ARROW 4 times Shows the serial number
then SELECT of the unit at the top
of the screen.
Restore last saved RESET If volume is changed,
volume restores last
saved volume.
Show internal test TEST (3 times) Displays several internal
parameters software variables, including
ACCGAINH, which is a
measure of servo
functioning. Press TEST
again to hide.