Velodyne Acoustics Digital Drive User Manual
Page 10
4
.
w w w . v e l o d y n e . c o m
Digital Drive User’s Manual
R E M O T E C O N T R O L B U T T O N S
A brief description of each button on the remote control follows:
• PWR – Causes woofer to stand by if in “Active”
standby mode.
• NUMERIC KEYPAD – Used to enter SETUP mode
and for other functions.
• SET (+/-) – Increases or decreases the Q value
for a parametric EQ, or sets values on the
settings page.
• LIGHT – Turns the subwoofer’s front panel Velodyne
logo indicator on or off.
• NIGHT – Limits the peak output of the subwoofer,
and illuminates the logo’s amber underlining to
signify that the subwoofer is in night mode.
• VOL (+/-) – Raises or lowers the volume of your
subwoofer. The blue (Velodyne) light flashes more
quickly as the volume increases, and the light blinks
out the volume level after you stop adjusting it. For
example, for a volume of 34, you would see three
long blinks followed by four shorter ones.
• MUTE – Mutes and unmutes the subwoofer.
• TEST – Used to toggle between the settings screen
and the system response screen during setup.
• EXIT – To exit SETUP mode. The unit will ask if you
want to save settings before exiting.
• SELECT – To toggle field values.
• RESET – Used to reset volume to the last saved
setting on the main screen, and to defeat
crossovers on the settings screen.
• MENU –
Enters SETUP mode from the
introductory screen.
• PRESETS – To access the five preset and one EQ
defeat listening modes. Initially set at the factory,
they are fully user adjustable. The blue (Velodyne)
light flashes the appropriate number of times to
indicate which preset you have selected (e.g. twice
for preset 2).
Figure 1: Velodyne Digital Drive remote control