Velodyne Acoustics Digital Drive - Manual (Page 38)

32
.
w w w . v e l o d y n e . c o m
Digital Drive User’s Manual
22. To manipulate a parametric EQ, you can now use the LEFT and RIGHT arrow keys to move
the frequency up and down, and the SET + and SET – keys to change the Q value. Use the
UP and DOWN arrow keys to adjust the level of the EQ as before. A selected EQ that has
been moved, with its level raised and Q adjusted is shown below:
23. To unselect the EQ, press SELECT again, then use the right and left arrow keys to position
the cursor on another EQ if desired, and repeat step 22, until the room is equalized.