Using 3gpp-compatible mobile devices – Vivotek PZ7131 User Manual
Page 16
![background image](/manuals/219428/16/background.png)
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
16 - User's Manual
Using 3GPP-compatible mobile devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed from the Internet� For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8�
To utilize this feature, please check the following settings on your Network Camera:
1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable�
For more information, please refer to RTSP Streaming on page 42�
2� As the 3G network bandwidth is limited, you can’t use large video size� Please set the video
and audio streaming parameters as listed below�
For more information, please refer to Audio and video on page 52�
Video Mode
MPEG-4
Frame size
176 x 144
Maximum frame rate
5 fps
Intra frame period
1S
Video quality (Constant bit rate)
40kbps
Audio type (GSM-AMR)
12.2kbps
3� As most ISP and players only support port number 554 to allow RTSP streaming to go
through, please set the RTSP port to 554� For more information, please refer to RTSP
Streaming on page 42�
4� Launch the players on 3GPP-compatible mobile devices (ex� Real Player)�
5� Type the URL commands in the player�
The format is rtsp:// name for stream1 or stream2>. For example: rtsp://192.168.5.151:554/live.sdp