Visioneer MFC7050C - Manual (Page 50)

O N - S C R E E N P R O G R A M M I N G
4 -4
1. Fax Functions (continued)
3. SETUP SEND
Function Description Factory Set Page
1. COVERPG SETUP Automatically sends a cover OFF 7-5~7-8
page you program.
2. COVERPAGE MSG Program customized message — 7-8
for fax cover page.
3. CONTRAST Change lightness or darkness AUTO 7-9
of a fax you are sending.
4. OVERSEAS MODE Adjusts for sometimes difficult OFF 7-9
overseas transmissions.
5. DELAYED FAX Send documents later. — 7-10
6. POLLED TX Sets up your MFC with a OFF 7-12
document to be retrieved
by another fax machine.
7. REAL TIME TX When memory is full, you can OFF 7-4
send faxes in real time.
4. REMAINING JOBS
Function Description Factory Set Page
Check which jobs are in 7-4, 7-5
memory or cancel a delayed
fax or polling job.
5. SET AUTO DIAL
Function Description Factory Set Page
1. ONE-TOUCH DIAL Dial numbers stored in memory — 8-1~8-2
by pressing only one key.
2. SPEED-DIAL Dial numbers stored in memory — 8-3
by pressing only three keys.
3. SETUP GROUPS Set up a Group number for — 8-5
broadcasting.