Visioneer XP 450 - Manual (Page 31)

26 V ISIONEER S TROBE XP 450 S CANNER U SER ’ S G UIDE
C
HECK THE
S
CAN
S
ETTINGS
B
EFORE
S
CANNING
1. To check the scan settings before scanning, press, hold down, and
then release, the Scan button.
The OneTouch Properties window opens for you to view and
change the configuration settings of the Scan button.
This sample shows that the Scan button is currently set to scan in
black and white using the US Letter configuration, save the
scanned image in the PDF format, and send the image to
PaperPort as the Destination Application.
Press, hold down, and then
release the Scan button to
see the current scan settings.
Note: The configurations
shown on this example of
the OneTouch Properties
window are for illustration
purposes only. The
configurations you see on
your OneTouch Properties
window may be different.