Volvo 2008 C70 - Manual (Page 192)

09 Maintenance and service
191
Replacing bulbs 09
Dipped beam
Removing the cover and bulb:
– Remove the entire lamp housing.
– Bend aside the catches and remove the
cover.
– Unplug the connector from the bulb.
– Release the spring clip that secures the
bulb. First, press it to the left to release it,
then out and down.
– Pull out the bulb.
– Refit the lamp housing.
Fitting a new bulb
– Fit the new bulb. It can only be fitted in
one position.
– Press the spring clip up and then slightly
to the right so that it clicks into place.
– Press the connector back on.
– Refit the plastic cover.
– Refit the lamp housing.
Main beam
– Remove the entire lamp housing.
– Left-hand headlamp:
Turn the bulb holder anticlockwise.
Right-hand headlamp:
Turn the bulb holder clockwise.
– Withdraw the bulb holder and change the
bulb.
– Refit the bulb holder. It can only be fitted
in one way.
– Refit the lamp housing.
G020255 G007339 G007338