To remove the front panel 10-15 – VXI VT1433B User Manual
Page 163
To remove the front panel
1
Remove top cover, see “To remove the top cover.” Gently disconnect cables from the printed circuit
assemblies. Using a T-8 Torx driver, remove the two screws that attach the handles to the assembly. Pull
out the handles making sure not to lose the two spacers.
2
Using a T-8 Torx driver, remove the screw that attaches the front panel to the bottom cover.
Gently pull the front panel off.
VT1433B User's Guide
Replacing Assemblies
10-15