Option menu – VIEWSONIC PJ551 User Manual

Page 20

ViewSonic PJ501/PJ551

OPTION Menu

The OPTION menu has 5 items as shown in the Table 9.

Please select the item you want to operate with the

buttons and

press the

button or the ENTER button to start operating. Then you

can operate according to the following table.

Table 9: OPTION Menu

Item

Actions/Description

VOLUME

Adjust Volume: Loud

Quiet

AUTO OFF

Adjust AUTO OFF Time:

• Long (MAX. 99 min.)
• Short (Min. 1 min.)
• (DISABLE: 0 min.)

The system automatically enters the standby mode when no signal is received for the set time.
When the DISABLE (0 min.) is selected this function is inactive.

WHISPER

Select WHISPER Mode:

NORMAL

WHISPER

The WHISPER mode is active when WHISPER is selected. In the WHISPER mode, acoustic
noise level from the unit is reduced and the brightness level on screen is lowered.

LAMP TIME

Refer to Lamp Time: The starting of this item displays the time that the projector lamp has been
used.

Reset Lamp Time [Use this function only when the lamp is replaced!] : Keep pressing the
RESET button for 3 seconds or more during the display of the lamp time. Then the menu for

reset will appear. When you have replaced the lamp, select the RESET on the menu with the

button.

• Do not reset the lamp time without replacing the lamp. Reset the lamp time always when

replacing the lamp. The message functions will not operate properly if the lamp time is not
reset correctly.

• Before replacing the lamp, carefully read the descriptions of "Lamp", "Lamp Life" and

"Replacing the Lamp".

FILTER TIME

Refer to Filter Time: The starting of this item displays the time that the air-filter has been used.

Reset Filter Time [Use this function only when the filter is replaced!] : Pres the RESET
button for 3 seconds or more during the display of the filter time. Then the menu for reseting the
filter time will display. When you have replaced the filter, select the RESET on the menu with the

button.

• Do not reset the filter time without replacing the filter. Reset the filter time always when

replacing the filter. The message functions will not operate properly if the filter time is not reset
correctly.

• Before replacing the air filter, carefully read the descriptions of "Air-Filter" and "Replacing the

Filter" on page 20.