Vidikron PLASMAVIEW VP-6500VHDA - Manual (Page 65)

Maintenance and Troubleshooting
Vidikron PlasmaView VHD Installation/Operation Manual 53
PRE
L
IMINAR
Y
RGB-HD images appear
“noisy.” • Clock and Phase settings
need adjustment. • Adjust Clock and Phase
settings (refer to ISF Night -
Input Color on page 45).
Computer images do not
display correctly. • The resolution and
frequency of the video card
in the computer are not
compatible with the
PlasmaView VHD. • Select a compatible
resolution and vertical
frequency (refer to
Supported Timings on
page 66).
The image is too large or too
small. • Image size needs adjusting. • Adjust the image size (refer
to Input Position on
page 42 or Display
Device - Display Position
on page 47).
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution