Using your camera as a pc camera, Pc c, Sing – Visioneer MX 200 User Manual
Page 51: Amera
U
SING
Y
OUR
C
AMERA
AS
A
PC C
AMERA
45
U
SING
Y
OUR
C
AMERA
AS
A
PC C
AMERA
With your camera in PC mode, you can use it with the supplied
Visioneer Digital Camera Utility software to create videos and
snapshots directly on your computer. You can also use other
commercially available video capture software and real-time video
conferencing software such as Microsoft NetMeeting
TM
.
To connect your camera:
1.
Connect the small connector of the USB cable to the USB
port on the camera. See “Back View” on page 6 for the
position of the USB port on the camera.
2.
Connect the large end of the USB cable to an empty USB slot
on your computer. To locate a USB slot, look for the USB icon
next to the connection slot.
3.
Turn on the camera with the Mode dial set to PC.
Note: Before copying photos to your computer, you must
install the software from the CD and set your camera up as new
hardware on your computer. See page 37 and page 39 for details.