VIEWSONIC DLP Projector Pro8200 User Manual
Page 34
ViewSonic Pro8200
30
Black, Red, Green, Blue,
Cyan, Yellow, Magenta, White
Status Message
Information
Factory Default
Equivalent Lamp Hours
Equivalent Lamp Hours
Reset
Filter Hours*2
Filter Hours Reset*2
Input Password
Password Delete
Off, CC1, CC2, CC3, CC4,
T1, T2, T3, T4
Input Source
OSD Setting
OSD Timeout
Top-Left, Bottom-Left,
Top-Right, Bottom-Right
20 - 60
0, 10, 20, 30, 40, 50, 60, 70, 80, 90
OSD Transparency
Zoom
DCR
Test Pattern
Others
Swap
Display Type
Off, PIP, POP
Yes, No
On, Off
Function*3
On, Off
On, Off
Green Mode
*1 Adjustable range and default setting vary depending on signal type.
*2 This function is only available when the projector is installed an optional filter cover.
*3 The selectable Function list includes Color Mode, Gamma, Overscan, Noise
Reduction, Keystone and Filter Mode.
*4 Saturation is supported under Component, Video and S-Video modes.
*5 Sharpness is supported under HDMI, Component, Video and S-Video modes.
*6 Tint is supported under Component, Video and S-Video modes.