Volvo S60 S60R - Manual (Page 225)

10 Infotainment system
224
Dolby Surround Pro Logic II HU-850
10
General
Dolby Surround Pro Logic II is a further re-
finement of the previous system and pro-
vides a significantly improved sound experi-
ence. This improvement is especially notice-
able to rear seat passengers.
Dolby Surround Pro Logic II together with a
centre speaker in the dashboard offers a
sound experience very close to being there.
The normal left-right stereo channels are di-
vided into left-centre-right. In addition, sur-
round sound is produced by the rear speak-
ers. Dolby Surround Pro Logic II works in CD
mode.
3-channel stereo (3-CH) is recommended for
AM
and FM radio transmissions.
Dolby Surround Pro Logic II is a registered
trademark of Dolby Laboratories Licensing
Corporation. Dolby Pro Logic II Surround
System is licensed from Dolby Laboratories
Licensing Corporation.
Dolby Surround Pro Logic II Mode
To select Dolby Surround
Pro Logic II Mode, press
"
PL II". " PL II" is
shown in the display. Press
OFF to return to 2-channel
stereo.
3-channel stereo
Select 3-channel stereo by
pressing 3-CH. "
3 ch " will
be shown in the display.
Resume 2-channel stereo
function by pressing OFF.
Centre Level
This function is used to set the level of the
centre channel.
– Press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
and press SOURCE.
– Turn SOURCE, select CENTRE LEVEL
and press SOURCE.
– Turn SOURCE, select level and
press SOURCE.
– Press EXIT.
Surround Level
This function is used to set the output level of
the rear channels.
– Press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
and press SOURCE.
– Turn SOURCE, select
SURROUND LEVEL and press SOURCE.
– Turn SOURCE, select level and
press SOURCE.
– Press EXIT.
Mid EQ Level
This function is used to fine-tune the sound
from the speakers.
– Press SOURCE.
– Turn SOURCE, select ADVANCED MENU
and press SOURCE.
– Turn SOURCE, select AUDIO SETTINGS
and press SOURCE.
– Turn SOURCE, select MID EQ LEVEL and
press SOURCE.
– Turn SOURCE, select level and
press SOURCE.
– Press EXIT.