Uniden Data 2000 Wireless CDPD PC Card - Manual (Page 90)

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card
D-8
AT Command Syntax Description of Command
AT REG? Read Auto-Registration Mode from a
[CAT][MDT][UDT][SPDT] particular default table.
Response: Auto Registration Mode 0 or
Auto Registration Mode 1
(If the option is not specified the CAT will
be used as the default table.)
Auto Registration Mode 0 means Auto
Registration is off, Auto Registration Mode 1
means Auto Registration is on.
AT SLI? Read Modem’s serial line interface mode
[CAT][MDT][SPDT][UDT] from a particular default table.
(If the option is not specified the CAT will
be used as the default table.)
Response: MES SLI MODE AT or
MES SLI SLIP
AT SPI? Read Service Provider Identifier from a
[CAT][MDT][SPDT][UDT] particular default table.
(If the option is not specified the CAT will
be used as the default table.)
Response: (n,
REQ>)
AT SPNI? Read Service Provider Network Identifier
[CAT][MDT][SPDT][UDT from a particular default table.
(If the option is not specified the CAT will
be used as the default table.)
Response: (n,
REQ>)
AT WASI? Read Wide Area Service Identifier from
[CAT][MDT][SPDT][UDT] a particular default table.
(If the option is not specified the CAT will
be used as the default table.)
Response: (n,
REQ>)