Uniden Data 2000 Wireless CDPD PC Card - Manual (Page 61)

▲ ▲ Uniden Data 2000 Wireless CDPD PC Card
Uniden Data 2000 Installation and Operation Manual 2-53
2.10 Using Windows CE Remote Networking
To use your Uniden Data 2000 Modem with Windows CE Remote
Networking, take the following steps:
2.10.1 Installing Remote Networking
1. From the Start, click Programs. Click Communication.
Click Remote Networking.
2. In the Remote Networking window, double-click Make
New Connection.
3. Type UD2000 in the Type a name for the connection and
select Dial-up Connection.
4. Click Next.
5. Select UNIDEN-UD2000PC_CARD for the Select a modem:
6. Click TCP/IP Settings. Deselect Use software compression
and Use IP header compression.
7. Click Name Servers tab.
8. Deselect Server-assigned addresses and enter the IP
address of the DNS provided by your CDPD carrier. Then,
click OK.
9. Click Next.
10. Enter your Country code, Area code and enter 0 for the
Telephone number. Select Force local.
11. Click Finish.
2.10.2 Connecting to the CDPD Network
To Connect to the CDPD Network, take the following steps:
1. Double click the new icon you created in the previous section.
2. Leave User Name, Password and Domain Blank.
Then, click Connect.
A Window should appear, displaying the progress of your connection.
Within a few seconds, the connection display should show a remote
networking connection has been established.