Uniden FP105 - Manual (Page 8)

HANDSET SPEAKERPHONE
1. Pick up the Handset from the Base. 1. Key in desired telephone number.
MAKING A 2. Dial desired number. 2. Press dial button (The phone goes
CALL 3. Hang up upon completion of the call. speakerphone mode automatically)
3. To hang up, press speaker key.
RECEIVING I
CALL
1. Pick up the Handset from the Base. 1. Press speaker key. Speak.
2. Speak. 2. To hang up, press speaker key
3. Hang up upon completion of the call. again.
➤ REDIAL
If you want to redial the last number dialed simply pick up the handset or
press the speaker button, then press the rdl/p button. The telephone will
automatically redial the last number dialled.
➤ SPEAKPHONE
You can place a call on Speakerphone mode anytime by pressing the
speaker button during a call, then place the Handset on the base. Also, you
can transfer a call to the Handset anytime during a call by simple picking up
the Handset.
➤ RINGER VOLUME
While the phone is ringing, you can adjust the ringer volume of your
telephone by moving the ringer volume switch, located at the rear of the
telephone, to the desired off/lo/hi position.
➤ BASE SPEAKER VOLUME
While on a call, adjust base speaker volume slider control, located at the
right side of the telephone, to the desired level.
➤ HANDSET VOLUME
While on a call, adjust the handset volume switch, located at the side of the
2.
telephone, to the desired level.
To begin conversation again, pick up the handset or press the speaker button or pick up
an extension phone (if available), the hold will then be automatically released.
While the phone is ringing, you can adjust the ringer tone of your telephone by moving the
ringer tone switch, located at the rear of the telephone, to the desired tone.
Press the mute button to turn off the handset microphone,
allowing private conversations in the same room without the
other party hearing.
Press the mute button again to resume the conversation with
the calling party.
!
During the mute condition, the display will show < MIC MUTE >.
.
1. To place a call on hold, press the hold button
and hang up.
The hold/speaker LED will flash, the display
will show < CALL ON HOLD >.
➤ MUSIC ON HOLD
When a call is placed on hold, the telephone will play a popular melody to reassure your Caller
that the call has not been disconnected.