Uniden FP105 - Manual (Page 11)

➤ block CID
Each time you make a call, your telephone number is automatically
forwarded to the party you are calling (unless your number is a silent
number). In certain cases you may wish to prevent your number being
sent, follow these, steps.
1.
2.
3.
Pick up the handset or press the speaker button.
Wait for the dial tone,
Press the block C/D button
Dial the telephone number of the person you wish to call.
Your telephone number will be withheld for this call only.
➤ call diversion on
Telstra’s ‘Call Forward No Answer’ Service is available for diverting calls to another number if
your phone is not answered within 20 seconds (approximately 7 or 8 rings).
1. Pick up the handset or press the speaker button.
2. Wait for the dial tone, press the call diversion on button and then
hang up. The telephone will automatically dial the access code
‘*61#’ and will enable ‘Call Forward No Answer’ feature thus,
diverting unanswered calls to the fixed number you have previously
assigned the divert to.
➤ TO PROGRAM/RE-PROGRAM THE FIXED “CALL FORWARD.....” NUMBER
Follow the example below, replacing the number 9876 5432 with the number you wish to divert calls to.
Example
1. Pick up the handset or press the speaker button. Wait for the dial tone.
2. Press
l
6 19 8 7 6 5 4 3 2 #on the keypad. You will hear a long beep and a voice
announcement confirming that this feature has been activated.
3. Hang up.
To confirm the diverted number;
1. Turn ‘Call Waiting’ off
(Pick up the handset, wait for dial tone, press #4 3#, wait for confirmation tone then hang up)
2. Dial your own number.
The number you are forwarding your calls to will begin to ring.
The normal Local, Mobile or National Call charges will apply.
!
Until you cancel the ‘ Call Forward No Answer’ diversion all unanswered incoming calls
will be diverted after 20 seconds (approximately 7 or 8 rings).
l call diversion off
To cancel ‘Call Forward No Answer’ to another number.
1. Pick up the handset or press the speaker button.
2. Press the call diversion off button and then hang up.
The telephone will automatically dial the access code ‘#61#’
and will cancel the diversion.
l message bank
‘Message Bank’ is Telstra’s “invisible answering machine”.
When your line is busy, or you are not able to answer your
phone ‘Message Bank’ to play callers, your own personal
greeting and be prompted to leave a message.
You can tell if you have a message in your ‘Message Bank’
because the message LED will be flashing on your
telephone and the vmwi envelope icon will be shown on the
display.
If the message LED is flashing, press the message bank button then the dial button.
The phone will enter the speaker phone mode and dial the Sydney FREECALL Message Bank
number 1800 351 244. When prompted, enter your PIN number followed by the ‘#’ key.
Once you reach the main menu press ‘1’ to listen to your messages.
!
There is a month/y fee using the Message Bank service.
For subscription and further information about Message Bank please call 1800 052 052
.
(this is a free call unless from a mobile phone).
Adelaide : 1 800 351 844 Brisbane : 1 800 351 744
1. Press the store button 1. Press the store button
2. Press the message bank button 2. Press the message bank button
3 . P r e s s the >> button 7 times 3 . P r e s s the >> button 7 times
4 . P r e s s the keypad 8 button 4 . P r e s s the keypad 7 button
5. Press the delete button 5. Press the delete button
6 . P r e s s the store button 2 times 6 . P r e s s the store button 2 times
7. Press the message bank button 7. Press the message bank button
Melbourne : 1 800 351 344 Perth : 1 800 351 944
1. Press the store button 1. Press the store button
2. Press the message bank button 2. Press the message bank button
3. Press the >> button 7 times 3. Press the >> button 7 times
4. Press the keypad 3 button 4. Press the keypad 9 button
5. Press the delete button 5. Press the delete button
6. Press the store button 2 times 6. Press the store button 2 times
7. Press the message bank button 7. Press the message bank button