Uniden FP105 User Manual
Page 10
➤
EDITING A STORED ONE-TOUCH SPEED DIAL MEMORY
1.
2.
3.
4.
5.
6.
7.
a.
Press the store button then the speed dial memory (1-12) vou want to edit
Move the cursor to the number you would like to edite by using >>
Press delete then key-in the desired number using the keypad
Press store (Display shows NAME?)
Move the cursor to the letter to be edited using >>
Press delete then key-in the desired letter using the keypad
Press store (Display shows STORE TO?)
Press speed dial memory locations (l-l 2) to store edited
information. The phone will beep & the display will show STORED.
➤
DELETING ONE SPEED DIAL MEMORY
1. Press the speed dial button (l-l 2)
(Display shows contents of this memory)
2. Press the delete button (Display shows DELETE 1-12 ?)
3. Press the delete button again
4. The phone beeps and the display shows DELETED.
➤
DELETING ALL SPEED DIAL MEMORIES
1. Press and hold the store button for 2 seconds to enter the
Options Menu (Display shows LCD CONTRAST)
2. Press the store button 4 times (Display shows RESET PP CODES)
3. Press the >> or << buttons to choose CLEAR SPEED DIAL
4. Press the store button to confirm your choice and exit the Options Menu.
Easy access to some of Telstra’s most popular network service features have been factory
programmed into this telephone for your convenience.
!
Some of the Telstra network services that will be described here are subscription or user
pays services. These services may not be available to all customers in a// areas.
To subscribe to any of these services, or check on the availability for you in your area,
.
please contact Telstra Residential Sales and Service on ‘13 2200’ or Telstra Business on
‘1 3 2000’.
➤
ACCESSING THE CALL WAITING SERVICE USING THE
call waiting
BUTTON
1. While talking, you hear the call waiting signal (series of beep tones).
icon appeaers on the display.
2.
Press the call waiting button to switch call and put the current call
on hold.
3.
To switch back to original call, press the call waiting button.
➤
ACCESSING THE CALL WAITING SERVICE USING THE flash BUTTON
1.
2.
3.
While talking, you hear the call waiting signal (series of beep tones).
icon appears on the display.
Press the flash button then 2 to switch call and put the current call on hold.
To switch back to original call, press the flash button then 1.
!
The flash + 2 call waiting procedure toggles call between the incoming and the original
call (vice versa). The flash + 1 procedure will drop the current call connection and pick up
the incoming call or the call on ho/d,
➤
transmit C/D
If your number is listed as silent, your telephone number will not be forwarded to the party you
are calling. In certain cases, such as calling friends or relatives, follow these steps if you wish
your number to be forwarded.
1.
Pick up the handset or press the speaker button.
Wait for the dial tone.
2.
Press the transmit C/D button
3.
Dial the telephone number of the person you wish to call.
Your telephone number will be forwarded for this call only.
Telstra is a registered trademark of Telstra Corporation Limited ACN 051 775 556