Uniden FP105 - Manual (Page 12)

To make use of these features, you must first subscribe to Telstra’s Caller ID Service,
There is usually a fee for this service, and may not be available in all areas.
➤ 33 MEMORY CALLER ID
When you use this telephone with the Caller ID service,
you will see the number of the calling party (unless the call
is blocked or is from a silent number) before you answer
the phone. This telephone will store and display information
about the last 33 calls received. Each call is numbered in
the call history, together with the time and date the call was
received. When the memory is full, the oldest call
information is deleted to make room for new incoming call
information.
Uniden
➤ CALLER ID ON CALL WAITING
This feature allows you to see the number of the calling party (unless the call is blocked or is
from a silent number) while you are on call. However, you must first subscribe to Telstra’s
Caller ID Service and activate your call waiting service.
!
To pick up the c a l l follow steps in ACCESSING CALL WAITING on page 18.
.
Caller ID on call waiting may not be available in all areas.
!
If you do not subscribe to the Caller ID Service, we recommend you set the Caller ID on
Call Waiting to OFF.
➤ NEW CALL NOTIFICATION
When a new call is received, the time, date and calling number will be displayed between the
first and second ring.
Uniden
.
➤ NEW CALL REVIEW
To review only new call information;
1. Press the mode button, and the display will show
REVIEW NEW CALL.
2. Use the << or >> buttons to view the new calls. When
the display shows END OF LIST or TOP OF LIST
When all new calls have been reviewed, the new call
LED will stop flashing.
➤ CALLER ID SUMMARY
The display will show the caller ID summary TOTAL CALLS XX
(where XX is the total number of calls stored in the memory)
➤ CALL REVIEW
To review all the calls in the call history, use the << or >>
buttons.
When the display shows END OF LIST or TOP OF LIST,
all calls have been reviewed.
!
If the caller id number is longer than 76 digits,
you can press the keypad digit 3 to view the
next digit to the right. Press the keypad digit 1
. to view the next digit to the left. The phone will
beep 4 times in quick succession when the end
of the number has been reached.
The new call LED will flash quickly when the phone is
ringing, and then change to a slow flash. It will
continue to flash until all new call information in the
call history has been reviewed.