Uniden FP102 - Manual (Page 27)

TROUBLESHOOTING
Problem
Can’t make or receive calls.
Can’t hear the telephone ringing.
Speakerphone Volume too low.
One Touch Speed Dial Numbers are not
working correctly.
Handset does not hang up in the wall mount
position.
Suggestion
• Make sure you use only the line cord supplied
with this telephone.
• Check that both ends of the telephone
line cord and Handset cord are plugged in.
• Make sure you do not have too many
telephones connected to the telephone line.
• Adjust the Ringer Volume to either
med/high.
• Plug another telephone into the telephone
socket and check for a dial tone.
• During speakerphone conversation, adjust the
speaker volume slider control on the side of
the telephone.
• Repeat the memory storage procedures detailed
on page 19.
• Make sure the Handset Retainer Tab has been
turned around (point facing up) and the
Handset is placed firmly into the cradle.
27
If your Telephone is not performing to your expectations, please try these simple
steps. If you are still unable to resolve the problems, contact Uniden Customer
Service for assistance.
TROUBLESHOOTING
New Zealand: 0800 4 UNIDEN
4 864336
Australia: 1800 632 789
FP102-OM.qxd 7/12/98 09:28 Page 27