Mute, Placing a call on hold, Music on hold – Uniden FP102 User Manual

Page 19: Speakerphone

ACCESSING THE CALL WAITING SERVICE USING THE
CALL WAITING BUTTON (Australian Model only)
1. While talking, you hear the call waiting signal (series of beep tones).

2. Press the

button then

to switch call and put the current

call on hold.

3. To switch back to original call, press the

button then

MUTE
Press and hold the

button to turn off the Handset microphone, allowing

private and confidential conversations in the same room without the calling party
hearing. Release the

button to resume the conversation with the calling

party.

PLACING A CALL ON HOLD
1. To place a call on hold, press the

button. The

status

LED will

flash green and you can hang up. (The Party on Hold will hear music).

2. To begin the conversation again:

Pick up the Handset or press the

button or pick up an extension

phone, the hold function will then be automatically released.

MUSIC ON HOLD
When a call is placed on Hold, the

status

LED flashes and the telephone

will play a popular melody to reassure your caller that the call has not been
disconnected.

SPEAKERPHONE
To answer an incoming call, press the

button and begin your

hands free SpeakerPhone conversation. Lift the Handset to resume normal
conversation

USING YOUR FP102

USING

YOUR

FP102

NOTE: The

call waiting procedure toggles call between the incoming

and the original call (vice versa). The

procedure will drop the

current call connection and pick up the incoming call or the call on hold.

FP102-OM.qxd 7/12/98 09:27 Page 19