Using the pre-programmed feature buttons - nz, Call minder, Divert on – Uniden FP102 User Manual

Page 20: Using your fp102

USING

YOUR FP102

USING YOUR FP102

USING THE PRE-PROGRAMMED FEATURE BUTTONS
(New Zealand Model only)
Instant access to some of Telecom’s most popular network service features have
been factory programmed into this telephone for your convenience.

Call Minder

Telecom’s Call Minder Message Centre is available for leaving and retrieving
messages.

Pick up the handset or press the

button. Wait for the dial tone then

press the

button.

The telephone will automatically dial the access code ‘083210’ to connect you
with Telecom’s ‘Call Minder’ service. Telecom’s ‘Call Minder’ Service will talk you
through the rest.

Divert On

Telecom’s ‘Immediate Call Diversion’ Service is available for diverting calls to
another number.

To make a SpeakerPhone call, press the

button, listen for the dial tone

then use the keypad to dial the number you want to call. Lift the Handset to
resume normal conversation.
During a regular telephone conversation you can press the

button and

replace the Handset. The

status

LED turns green and you can begin your

SpeakerPhone conversation.

NOTE: It is not recommended to operate the

function under

noisy conditions.

NOTE: The

status

LED turns green during SpeakerPhone use, and red during

normal use.

NOTE: During a conversation you can adjust the

speaker

Volume Control on the side of

the telephone to increase or reduce the other parties voice.

FP102-OM.qxd 7/12/98 09:27 Page 20