Uniden FP102 - Manual (Page 14)

INST
ALLA
TION
INSTALLATION
WALL MOUNTING
You can mount your phone directly on a wall. Before mounting your phone,
consider the following:
• Select a location away from electrical cables, pipes or other items behind
the mounting location that could cause a hazard when inserting screws
into the wall.
• Make sure the wall material is capable of supporting the weight of the
Telephone.
• Use the screws (supplied) with anchoring devices suitable for the wall
material where the Telephone will be placed.
1. Insert two mounting screws 85mm apart. Allow
about 5mm between the wall and screw heads for
mounting the phone.
14
2. Gently pull and turn the Handset Retainer
Tab 180° and release.
4. Place the Base Unit on the screws and push down until it’s firmly seated.
3. Fit the Wall Mounting Bracket to the
Bottom of the telephone as shown.
FP102-OM.qxd 7/12/98 09:27 Page 14