Uniden DECT1725 - Manual (Page 5)

Setting up
Follow these simple steps to prepare your
phone(s) ready for use.
Finding a location
Connecting your phone
Make sure your phone is:
• Within 1.8 metres of a power and phone socket
so that the cords will reach.
• At least 1 metre away from other electrical
appliances, to avoid interference.
• Not located in humid or damp conditions, e.g. in
a bathroom.
1 Connect the base power supply into the socket
on the back of the base. Plug the other end into
the mains power socket.
2
Connect the power supply attached to each
charger into the mains and switch on.
On each charger (multi-packs only):
WARNING
Use only the power supply that came with your
phone.
Using another power supply could seriously
damage your phone and invalidate your
warranty.
Do not connect the telephone line cord until
your handset is fully charged. This will prevent
the risk of the phone being answered before the
batteries are charged. Answering the phone
before the batteries are fully charged may
prevent them from reaching their optimum
capacity.
[4]