Uniden DECT1725 - Manual (Page 29)

On the handset you want to register:
5 Press .
6 Enter the base PIN code. Pre-set base PIN
ode is 0000.
7 Press .
You will hear a confirmation tone when registration
is complete.
When in standby mode, the new handset number
will be displayed.
The handset will automatically be allocated with
the next available handset number.
If the registration is failed, the handset display
returns to the display before enter the registration
step.
If you have more than one handset registered to
your base you can de-register a handset
registered to use.
Before registering, make sure all handsets and the
base are in standby mode.
1 On a handset not to be de-registered, press
to access the main menu.
2 Press or until is
displayed and press .
3 Press or to display
and press .
4 is displayed. Enter your PIN code and
press .
5 Press or to display the handset you
want to de-register and press .
If the handset has been registered to the base
successfully, you will hear a confirmation tone.
De-register a handset
BS SETTINGS
TERMINATE HS
PIN ?
[28]
menu/ok
menu/ok
menu/ok
cid
menu/ok
cid
menu/ok
cid
menu/ok
menu/ok