Uniden XSA1255 - Manual (Page 48)

Command Function Command Function
# then 1 Repeat a Message* # then 6 Answering System On
# then 2 Play incoming Messages # then 7 Memo Record/ Stop**
# then 3 Skip a Message # then 8 Greeting Message
Record/ Stop**
# then 4 Delete a Message # then 9 Answering System Off
# then 5 Stop Operation # then 0 Help
* For the Repeat a Message function, press # then 1 within about four seconds to repeat the previous
message, or press # then 1 after about four seconds to repeat the current message.
** For Memo Record and Greeting Message Record function, the first time you enter the
corresponding command, it starts the Recording function. If you want to stop the recording, enter the
command again.
5) After the command has finished, you hear intermittent beeps indicating that the system is in the
command waiting mode. You may enter another command at this time from the chart above.
6) When you are finished, hang up to exit the system. The answering system automatically returns to
standby.
[47]